Heater and Air Conditioning Control Replacement C60

1. Remove the IP cluster bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages and Console.



2. Remove the HVAC control assembly by firmly depressing and holding the retaining tabs and then sliding the assembly away from the dash.
3. Disconnect the electrical connectors from the HVAC control assembly.
4. Remove the HVAC control assembly.

1. Install the HVAC control assembly.
2. Connect the electrical connectors to the HVAC control assembly.



3. Install the HVAC control assembly to the I/P carrier until a snap is heard.
4. Install the IP cluster bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages and Console.

Heater and Air Conditioning Control Replacement Heat Only

1. Remove the radio. Refer to Radio Replacement in Entertainment.



2. Remove the HVAC control assembly (1) by firmly depressing and holding the retaining tabs and then sliding the assembly away from the dash.
3. Disconnect the electrical connector from the HVAC control assembly.



4. Disconnect the temperature cable (1) and mode cable (2) from the back of the HVAC control assembly (3).
5. Remove the HVAC control assembly (3).

1. Install the HVAC control assembly (3).



2. Connect the temperature cable (1) to the back of the HVAC control assembly (3).
3. Connect the mode cable (2) to the back of the HVAC control assembly (3).
4. Connect the electrical connector to the HVAC control assembly (3).



5. Install the control head (1) to the carrier until a snap is heard.
6. Install the radio. Refer to Radio Replacement in Entertainment.