Step | Action | Value(s) | Yes | No | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Schematic Reference: Audible Warnings Schematics DEFINITION: One or more chime functions are inoperative. | ||||||||||||
1 | Did you review the system operation and perform the necessary inspections? | -- | Go to Step 2 | |||||||||
2 |
Does the chime sound? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 | ||||||||
3 | Connect a test lamp between the battery positive voltage circuit of the multifunction alarm module and a good ground. Does the test light illuminate? | -- | Go to Step 4 | Go to Step 10 | ||||||||
4 |
Does the test light illuminate? | -- | Go to Step 8 | Go to Step 5 | ||||||||
5 |
Does the chime sound? | -- | Go to Step 9 | Go to Step 6 | ||||||||
6 | Connect a 3 amp fused jumper wire between the key-in ignition switch signal circuit and a good ground. Does the chime sound? | -- | Go to Step 11 | Go to Step 7 | ||||||||
7 | Test the key-in ignition switch signal circuit for an open or a high resistance between the key-in ignition switch and the driver door jamb switch; and between the key-in ignition switch and the multifunction alarm module. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 15 | Go to Step 14 | ||||||||
8 | Inspect for intermittent and poor connections at the harness connector of the multifunction alarm module. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 15 | Go to Step 12 | ||||||||
9 | Inspect for intermittent and poor connections at the harness connector of the driver door jamb switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 15 | Go to Step 13 | ||||||||
10 | Repair the open or a high resistance in the battery positive voltage circuit of the multifunction alarm module. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 15 | -- | ||||||||
11 | Repair the open or a high resistance in the driver door jamb switch ground circuit. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 15 | -- | ||||||||
12 | Replace the multifunction alarm module. Did you complete the replacement? | -- | Go to Step 15 | -- | ||||||||
13 | Replace the driver door jamb switch. Refer to Door Jamb Switch Replacement in Doors. Did you complete the replacement? | -- | Go to Step 15 | -- | ||||||||
14 | Replace the key-in ignition switch. Refer to:
Did you complete the replacement? | -- | Go to Step 15 | -- | ||||||||
15 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 | ||||||||
