GM Service Manual Online
For 1990-2009 cars only

Tools Required

J 34940 Rivet Gun

Removal Procedure

  1. Remove the trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .

  3. Object Number: 277771  Size: SH
  4. Remove the inside door handle assembly by completing the following steps:
  5. • Drill out the rivet head using a 5 mm (0.2 in) drill bit.
    • Slide forward the door handle.
  6. Disconnect the control rods from the handle and the lock lever.

Installation Procedure

  1. Connect the control rods to the handle and the lock lever.

  2. Object Number: 277771  Size: SH
  3. Install the inside door handle by completing the following steps:
  4. • Insert the handle assembly into the slot.
    • Slide the assembly to the rear.
    • Using the J 34940 , install the handle rivet.
  5. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
  6. Install the trim panel. Refer to Front Side Door Trim Panel Replacement .