Removal Procedure
- Lower the window.
- Remove the trim panel. Refer to
Front Side Door Trim Panel Replacement
.
- Remove the water deflector. Refer to
Front Side Door Water Deflector Replacement
.
- Carefully pry out the retainer clips in order to remove the speaker,
as necessary.
- Remove the inner panel
bolts.
- Remove the lock rods from the following components:
- Disconnect the wiring harness.
- Slide the inner mounting panel rearward in order to release the
regulator roller from the window sash.
Remove the inner mounting panel.
Installation Procedure
- Slide the inner mounting panel forward in order to release the regulator
roller from the window sash.
Install the inner mounting panel to the window sash.
- Connect the wiring harness.
- Install the lock rods
to the following components:
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the inner panel bolts.
Tighten
Tighten the bolts to 4 N·m (35 lb in).
- Install the speaker, as necessary.
- Install the trim panel. Refer to
Front Side Door Trim Panel Replacement
.
- Install the water deflector. Refer to
Front Side Door Water Deflector Replacement
.