For 1990-2009 cars only
- Install the new gasket to the oil pump drive.
- Install the oil pump drive to the engine.
- Install the clamp and the bolt.
| • | Index the drive with the camshaft gear and the oil pump drive shaft. |
| • | Make sure the drive seats fully. |
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the bolt to 42 N·m (31 lb ft).
