Grille Replacement for Chevrolet Chevy C Cab/Chassis HD (GMT 400) 2005

Grille Replacement Base

1. Remove the parking lamps and the side markers from the upper grille.
2. Remove the screws (5, 6) holding the upper grille (4) to the vehicle.
3. Remove the screw holding the upper grille to the latch support.
4. Remove the screws holding the upper grille to the radiator support.
5. Unsnap the upper grille from the filler panel and the vehicle.

1. Snap the upper grille and the filler panel into place.
2. Install the filler panel to the vehicle with the bolts.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the screws (5, 6) holding the upper grille to the radiator support.

Tighten
Tighten the upper grille screws to 1 N·m (9 lb in).

4. Install the screw holding the upper grille to the latch support.

Tighten
Tighten the upper grille screws to 2 N·m (18 lb in).

5. Install the parking lamps and the side markers.