Generator Bracket Replacement L18

1. Remove the generator. Refer to Generator Replacement .
2. Remove the drive belt tensioner. Refer to Drive Belt Tensioner Replacement in Engine Mechanical - 8.1L .
3. Remove the drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement in Engine Mechanical - 8.1L .
4. Remove the generator bracket bolt (2) and nut.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

1. Install the generator bracket bolt (2) and nut.

Tighten

•	Tighten the generator bracket bolt to 50 N·m (37 lb ft).

•	Tighten the generator bracket nut to 41 N·m (30 lb ft).

2. Install the drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement in Engine Mechanical - 8.1L .
3. Install the drive belt tensioner. Refer to Drive Belt Tensioner Replacement in Engine Mechanical - 8.1L .
4. Install the generator. Refer to Generator Replacement .