Wheelhouse Splash Shield Replacement for Chevrolet Chevy C Cab/Chassis HD (GMT 400) 2005

1. Remove the push pin retainers retaining the splash shield to the wheelhouse.
2. Remove the bolt retaining the splash shield to the wheelhouse.
3. Remove the clip retaining the splash shield to the rear of the wheelhouse.
4. Remove the splash shield from the wheelhouse.

1. Install the splash shields to the wheelhouse.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the clip in order to retain the splash shield to the rear of the wheelhouse.

Tighten
Tighten the retainers to 3 N·m (27 lb in).

3. Install the bolt in order to retain the splash shield to the wheelhouse.
4. Install the push pin retainers in order to retain the splash shield to the wheelhouse.