For 1990-2009 cars only
Removal Procedure
- Disconnect the electrical connector from the park brake switch.
- Depress the park brake pedal.
- Remove the park brake warning lamp switch retaining bolt.
- Remove the park brake indicator switch from the vehicle.
Installation Procedure
- Install the park brake indicator switch onto the locator pin at the park brake pedal.
- Install the retaining bolt.
- Connect the electrical connector to the park brake switch.
- Release the park brake.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the retaining bolt to 4 N·m (35 lb in).
