For 1990-2009 cars only
Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Support the transmission with a transmission jack.
- Remove the 2 nuts securing the transmission mount to the transmission support.
- Raise the rear of the transmission.
- Remove the transmission support nuts (4) and bolts (3).
- Remove the transmission support from the vehicle.
Installation Procedure
- Install the transmission support (1) to the vehicle.
- Install the transmission support nuts and bolts.
- Install the 2 nuts securing the transmission mount to the transmission support.
- Remove the transmission jack.
- Lower the vehicle.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the nuts and bolts to 65 N·m (48 lb ft).
Tighten
Tighten the nuts to 40 N·m (30 lb ft).
