Removal Procedure
- Raise the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Remove the tire and wheel. Refer to
Tire and Wheel Removal and Installation
in Tires and Wheels.
- Remove the outer tie rod. Refer to
Steering Linkage Outer Tie Rod Replacement
.
- Remove the brake rotor. Refer to
Front Brake Rotor Replacement
in Disc Brakes.
- Remove the bolts (2) and
nuts retaining the tie rod arm (1).
- Remove the tie rod arm from the vehicle.
Installation Procedure
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the tie
rod arm (1) to the vehicle.
Tighten
Tighten the tie rod arm retaining bolts (2) and nuts to 285 N·m
(210 lb ft).
- Install the outer tie rod to the steering knuckle. Refer to
Steering Linkage Outer Tie Rod Replacement
.
- Install the brake rotor. Refer to
Front Brake Rotor Replacement
in Disc Brakes.
- Install the tire and wheel. Refer to
Tire and Wheel Removal and Installation
in Tires and Wheels.
- Lower the vehicle.