Removal Procedure
- Remove the radio. Refer to
Radio Replacement
in Entertainment.
- Remove the HVAC control
assembly (1) by firmly depressing and holding the retaining tabs and
then sliding the assembly away from the dash.
- Disconnect the electrical connector from the HVAC control assembly.
- Disconnect the temperature
cable (1) and mode cable (2) from the back of the HVAC control
assembly (3).
- Remove the HVAC control assembly (3).
Installation Procedure
- Install the HVAC control assembly (3).
- Connect the temperature
cable (1) to the back of the HVAC control assembly (3).
- Connect the mode cable (2) to the back of the HVAC control
assembly (3).
- Connect the electrical connector to the HVAC control assembly (3).
- Install the control head (1)
to the carrier until a snap is heard.
- Install the radio. Refer to
Radio Replacement
in Entertainment.