END OF EXCHANGE PROGRAM INFORMATION

Model and Year 1987-88 CELEBRITY,CAVALIER, CORSICA, BERETTA WITH HM-282 MANUAL TRANSAXLE 1988 C/K TRUCKS WITH HM-290 MANUAL TRANSMISSION

Effective December 31, 1987, the existing exchange programs covered in Dealer Service Bulletins 87-24 (Section 7B) dated November 1986, and 88-05 (Section 78) March 1987, will be eliminated.

Service parts/overhaul packages will be available through GMSPO after mid-November 1987 for both transmissions.

General Motors Product Service Training has made available the following courses for your technicians training needs:

HM-282 - Course number 1700.04 ( 1 day) HM-290 - Course number 17003.11 ( 2 days)

Essential tools will be shipped from Kent-Moore in late October 1987.

Note: A small (toaster) oven is required to service both units but is not included with the essential tools. The oven is used to prevent part damage during assembly. Dealerships should obtain an oven before servicing these units. The ovens should have internal dimensions of: 3" in height, 6" in depth, and 10" in width. Ovens should also be capable of obtaining 500 degrees in temperature.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.