1. Disconnect the battery negative cables from the batteries. Refer to Battery Cable in Engine Electrical
2. Remove the upper fan shroud from the radiator. Refer to Fan Shroud Replacement .
3. Remove the drive belt from the pulleys. Refer to Drive Belt Replacement .
4. Raise the vehicle.
5. Remove the lower fan shroud from the radiator. Refer to Fan Shroud Replacement .
6. Remove the crankshaft balancer from the crankshaft. Refer to Crankshaft Balancer Replacement .

Important: Use care as not to damage the engine front cover, or the crankshaft when removing this seal.

7. Remove the crankshaft front cover oil seal from the engine front cover.

Tools Required

J 22102 Seal installer

1. Apply a small amount of clean engine oil to the sealing surface of the crankshaft balancer.
2. Apply a small amount of clean engine oil to the inner sealing surface of the oil seal.
3. Use the Install New Engine Front Cover Oil Seal 6.5L to install the crankshaft front cover oil seal.
4. Install the crankshaft balancer to the crankshaft. Refer to Crankshaft Balancer Replacement .
5. Install the lower fan shroud to the radiator. Refer to Fan Shroud Replacement .
6. Lower the vehicle.
7. Install the upper fan shroud to the radiator. Refer to Fan Shroud Replacement
8. Install the drive belt to the pulleys. Refer to Drive Belt Replacement .
9. Connect the battery negative cables to the batteries. Refer to Battery Cable in Engine Electrical.