- Start the engine.
- Charge the accumulator by pressing the brake pedal or by completely
turning the steering wheel in one direction and then in the other.
- Turn the engine off. Let the vehicle sit for an hour.
- Perform two power assisted applications with the engine off.
- If the accumulator failed to hold a charge after one hour, but
functions normally after charging, the accumulator valves are malfunctioning.
Replace the accumulator. Refer to
Power Brake Booster Replacement
.
- If the charging and discharging of the accumulator is audible,
but the accumulator still fails to hold a charge, the accumulator valves are
malfunctioning. Replace the accumulator. Refer to
Power Brake Booster Replacement
.
- Empty the accumulator by pressing the brake pedal 30 times.
- The accumulator can will rotate or wobble if the accumulator has
lost its gas charge. This replace the accumulator. Refer to
Power Brake Booster Replacement
.