Tilt Spring - Assemble - Off Vehicle Column Shift

1. Lubricate the spring guide with synthetic grease.
2. Install the spring guide (1) to the tilt spring (2).




Caution
The tilt spring and the spring guide are under pressure and could become and projectile. During the disassembly and assembly procedures, secure the tilt spring with locking pliers. Exercise caution when removing or installing the tilt spring and the spring guide, as bodily injury may result.

Install the tilt spring (1).

3.1.	Install the tilt spring (1) to the post on the steering column support assembly (2).

3.2.	Secure the tilt spring (1) with locking pliers.

3. Install the upper and lower shrouds. Refer to Steering Column Trim Covers - Assemble - Off Vehicle .

Tilt Spring - Assemble - Off Vehicle Floor Shift

1. Lubricate the spring guide with synthetic grease. Install the spring guide (1) into the tilt spring (2).



2. To install the tilt spring (1) do the following steps:

2.1.	Install the tilt spring (1) to the post on the steering column support assembly (2).

2.2.	Secure the tilt spring (1) with locking pliers.

3. Install the upper and lower shrouds. Refer to Steering Column Trim Covers - Assemble - Off Vehicle .