Application | Millimeters | Inches |
|---|---|---|
Aluminum Wheel | ||
| 0.762 | 0.030 |
| 0.762 | 0.030 |
Steel Wheel | ||
| 1.143 | 0.045 |
| 1.015 | 0.040 |
Tire and Wheel Assembly (Radial and Lateral) | ||
| 1.27 | 0.05 |
| 1.52 | 0.06 |
| 0.25 | 0.01 |
| 0.132 | 0.0052 |
Full-Size Pick-Up Truck | ||||||||
|---|---|---|---|---|---|---|---|---|
Propshaft | Front Runout | Center Runout | Rear Runout | Stub Shaft Runout | ||||
One-Piece | 0.61 mm | 0.024 in | 0.61 mm | 0.024 in | 0.61 mm | 0.024 in | -- | -- |
Aluminum Graphite | 0.61 mm | 0.024 in | -- | -- | 0.61 mm | 0.024 in | -- | -- |
Two-Piece Front Slip Yoke | 0.04 mm | 0.002 in | .25 mm | 0.010 in | -- | -- | 0.08 mm* | 0.003 in* |
Two-Piece Rear | 0.40 mm | 0.016 in | 0.25 mm | 0.010 in | 0.40 mm | 0.016 in | -- | -- |
Three-Piece | 0.61 mm | 0.024 in | 0.61 mm | 0.024 in | 0.61 mm | 0.024 in | 0.08 mm | 0.003 in |
*This measurement must be taken on the ground surface near the spline with the rear propeller shaft removed. | ||||||||
Application | Metric | English |
|---|---|---|
Pinion Runout | 0.076 mm | 0.003 in |
Correction, Total Weight | Clamp Spread, Degrees |
|---|---|
0.0 | 180 |
0.1 | 174 |
0.2 | 169 |
0.3 | 163 |
0.4 | 157 |
0.5 | 151 |
0.6 | 145 |
0.7 | 139 |
0.8 | 133 |
0.9 | 127 |
1.0 | 120 |
1.1 | 113 |
1.2 | 106 |
1.3 | 99 |
1.4 | 91 |
1.5 | 83 |
1.6 | 74 |
1.7 | 64 |
1.8 | 52 |
1.9 | 36 |
2.0 | 0 |
