Parking Brake Front Cable Replacement for Chevrolet Chevy C Pickup - 2WD 1999

Parking Brake Front Cable Replacement Except C3500HD

1. Release the parking brake.
2. Raise the vehicle and support the vehicle with safety stands.



3. Loosen the adjusting nut at the equalizer (2).



4. Remove the connector (1).



5. Disconnect the cable (2) from the parking brake lever (1).



6. Bend in the retaining fingers at the frame bracket.



7. Disconnect the front cable (2).

1. Install the front cable (2).
2. Connect the cable (2) to the parking brake lever (1).



3. Make sure all the retaining fingers are through the hole.



4. Install the connector (1).
5. Adjust the front cable. Refer to Park Brake Cable Service/Adjustment .

Parking Brake Front Cable Replacement C3500HD

1. Release the parking brake.
2. Raise the vehicle and support the vehicle with safety stands.



3. Remove the cotter pin (4).
4. Remove the clevis pin (3).
5. Disconnect the clevis (5) from the cable.
6. Disconnect the grommet (6) from the bracket.



7. Remove the cable (4) from the clip (5).
8. Disconnect the grommet (3) from the body (6).



9. Disconnect the retaining fingers (1) from the lever.
10. Remove the cable assembly.

1. Install the cable assembly (4).



2. Connect the retaining fingers (1) to the parking brake lever.
3. Connect the grommet (3) to the body (6).



4. Connect the grommet (6) to the bracket.



5. Install the cable (4) into the clip (5).



6. Connect the clevis (5) to the park brake cable. Make sure the retaining fingers are tight.
7. Adjust the parking brake cable. Refer to Park Brake Cable Service/Adjustment
8. Lower the vehicle.