Tools Required

J 36221 Quick Connect Coupling Special Tool

1. Remove the push rod from the clutch pedal.



2. Remove the hydraulic tube from the concentric slave cylinder quick connect coupling.



3. Using J 36221 , remove the clutch line from the concentric slave cylinder in order to depress the white plastic sleeve on the quick connect coupling. Separate the clutch line from the concentric slave cylinder.
4. Remove the tubes clips from the wiring harness bracket and sheet metal.
5. Rotate the master cylinder body 45 degrees clockwise in order to remove the master cylinder from the cowl panel.

1. Position the master cylinder to the cowl panel.




Important: Do not over rotate the master cylinder or damage will occur.

2. Install the master cylinder by holding it at a 45 degree angle and rotating it counterclockwise.
3. Connect the hydraulic tube to the concentric slave cylinder quick connect coupling.
4. Install the tube clips to the wiring harness bracket and the sheet metal.



5. Secure the push rod to the clutch pedal.
6. Check the reservoir to ensure the oil level is at the full level. Use Delco Supreme® II Brake Fluid (GM P/N 1052535) or an equivalent.