Body Side Lower Front Molding Replacement for Chevrolet Chevy C Pickup - 2WD 1999

1. Remove the push pins securing the Z-shaped brace brackets (1) from the cladding lower.
2. Remove the three nuts from the inner part of the rear quarter panel securing the rear quarter cladding (3)
3. Remove the cladding from the vehicle.

1. Install the Z-shaped brace brackets (1) to the Mounting Brace (2).
2. Install the mounting brace (2) to the rear quarter cladding (3).
3. Install the cladding (3) to the vehicle.
4. Install the two lower push pins into the Z-shaped brackets

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

5. Install the three mounting nuts.

Tighten
Tighten the three mounting nuts to 10 N·m (7.5 lb in).




6. Ensure proper fit and form to the lower rear quarter panel.