For 1990-2009 cars only
- Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
- Turn the ignition switch to the LOCK position.
- Remove the key from the ignition switch.
- Remove the AIR BAG Fuse from the IP fuse block.
- Remove the connector position assurance (CPA) (1) from the driver yellow 2-way connector located at the base of the steering column.
- Disconnect the driver yellow 2-way connector (2) located at the base of the steering column.
- Remove the connector position assurance (CPA) (2) from the passenger yellow 2-way connector located behind the glove box.
- Disconnect the passenger yellow 2-way connector (1) located behind the glove box.
Important: With the AIR BAG Fuse removed and the ignition switch in the RUN position, The AIR BAG warning lamp illuminates. This is normal operation, and does not indicate an SIR system malfunction.
