GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Chevy C Silverado - 2WD 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Front Fog Lamp Replacement

Removal Procedure

    Object Number: 373577 Size: SH
  1. Disconnect the electrical connector from the fog lamp.
  2. Remove the push pin retainers that attach the fog lamp to the bracket.
  3. Remove the fog lamp adjuster bolt and spring from the adjuster nut.
  4. Remove the fog lamp from the fog lamp bracket.
  5. Remove the fog lamp bracket bolts and bracket, as needed.

Installation Procedure

    Object Number: 373577 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the fog lamp bracket bolts and bracket, as needed.

    2. Tighten
    Tighten the fog lamp bolt to 25 N·m (18 lb ft).

  2. Install the fog lamp to the fog lamp bracket.
  3. Install the fog lamp adjuster bolt and spring to the adjuster nut.
  4. Install the push pin retainers that attach the fog lamp to the bracket.
  5. Connect the electrical connector to the fog lamp.