Removal Procedure
- Ensure the headlamp switch is in the OFF position.
- Remove the instrument panel storage compartment.
- Depress
the switch plunger.
- Pull the switch assembly downward from the retainer.
- Disconnect the electrical connector.
- Remove the shield from the switch assembly.
- Remove the bulb from the switch assembly.
Installation Procedure
- Install
the bulb into the socket.
- Install the shield to the switch assembly.
- Connect the electrical connector.
- Depress the switch plunger.
- Slide the assembly upward into the retainer.
- Install the instrument panel storage compartment.