Removal Procedure
- Gently push the assembly toward the front
edge of the door.
- Lift the rear of the assembly from the door by using a small flat
tool.
- Remove the courtesy lamp/reflector from the door panel.
- Twist and remove the socket container from the housing.
- Remove the bulb from the socket (if required for service).
Installation Procedure
- Install the bulb into the socket (if
required for service).
- Install the lens to the vehicle.
- Install the bulb and socket assembly into the housing into the
lens (if equipped).
- Insert the tab on the assembly into the slot in the door panel
at the front edge.
- Pivot the assembly into the door panel.
- Press the lens at the rear until the lens snaps into the door
panel.