Removal Procedure
- Record the lock code before removal (if equipped).
- Remove the instrument panel trim bezel. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
in Instrument Panel, Gauges and Console.
- Push down on the retainers in order to release the radio retainers.
- Slide the radio forward in order to remove the radio.
- Remove the electrical connectors and the antenna connection.
Installation Procedure
- Install the electrical connectors and the antenna connection.
- Slide the radio into the instrument panel.
- The unit will snap into place when fully seated.
- Install the instrument panel trim bezel. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
in Instrument Panel, Gauges and Console.
- Verify the component's operation.