Tools Required

J 42059 Cigarette Lighter Socket Remover

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the negative battery cable(s).
2. Lift up the front cover.



3. Insert the J 42059 into the socket sleeve. Tilt the tool so that the tool fits into the slots on the sides of the socket sleevel.



4. Hold the plastic ring in place. Pull the socket gently rearward in order to remove the outlet.



5. Remove the electrical connection(s).

1. Connect the electrical connection(s).
2. Insert the plastic ring into the opening and snap the plastic ring into place.
3. Insert the socket through the plastic ring until the socket ring is sealed.
4. Connect the negative battery cable(s).