GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Chevy C Silverado - 2WD 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Parking Brake Release Handle Assembly Replacement

Removal Procedure

    Object Number: 376009 Size: SH
  1. Remove the park brake release handle mounting bolt.
  2. Remove the park brake release lever handle from the knee bolster.
  3. Disconnect the park brake release cable from the park brake lever.

Installation Procedure

    Object Number: 376009 Size: SH
  1. Connect the park brake release cable to the park brake lever.
  2. Install the park brake release lever handle to the knee bolster.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the park brake release lever handle mounting bolt.

    4. Tighten
    Tighten to 25 N·m (18 lb ft).