Removal Procedure
- Disconnect the door wire harness. Refer to
Door Wiring Harness Replacement
.
- Remove the screws from
the upper and the lower
hinge.
- Remove the door check link screw from the pillar side.
- Lift the door up from the hinge pins. Remove the door from the
vehicle.
Installation Procedure
- Install the door to the
vehicle by setting the
door down on the hinge pins.
- Install the screws to the upper and the lower hinge.
- Install the door check link screw to the pillar side.
- Connect the door wire harness. Refer to
Door Wiring Harness Replacement
.