GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Chevy C Silverado - 2WD 🢒 Engine 🢒 Engine Cooling 🢒 Engine Coolant Fan Shroud Replacement

Removal Procedure
  1. Remove the air inlet duct. Refer to Air Cleaner Assembly Replacement in Engine Controls-4.8L, 5.3L, 6.0L, or Air Cleaner Assembly Replacement in Engine Controls-4.3L.

    2. Object Number: 367723 Size: SH
  2. Remove the radiator inlet hose and the holding clip from the shroud. 4.8L, 5.3L, and 6.0L engines.
  3. Reposition the radiator inlet hose.

    4. Object Number: 367017 Size: SH
  4. Remove the oil cooler line clip from the lower fan shroud (6.0L engine).

    5. Object Number: 362174 Size: SH
  5. Remove the fan shroud retainers.

    6. Object Number: 362162 Size: SH
  6. Remove the fan shroud bolts
  7. Remove the upper fan shroud.
  8. Remove the fan and clutch assembly. Refer to Fan Clutch Replacement .
  9. Lift the lower fan shroud up in order to disengage the fan shroud from the retaining clips on the radiator and remove.

Installation Procedure

    Object Number: 362162 Size: SH
  1. Install the lower fan shroud to the retaining clips on the radiator and firmly push down.
  2. Install the fan and clutch assembly. Refer to Fan Clutch Replacement .
  3. Install the upper fan shroud.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the fan shroud bolts.

    5. Tighten
    Tighten the bolts to 9 N·m (80 lb in).


    Object Number: 362174 Size: SH
  5. Install the fan shroud retainers.

    6. Object Number: 367017 Size: SH
  6. Install the oil cooler line clip from the lower fan shroud (6.0L engine).
  7. Reposition the radiator inlet hose.

    8. Object Number: 367723 Size: SH
  8. Install the radiator inlet hose and the holding clip to the shroud (4.8L, 5.3L, and 6.0L engines).
  9. Install the air inlet duct. Refer to Air Cleaner Assembly Replacement in Engine Controls-4.8L, 5.3L, 6.0L, or Air Cleaner Assembly Replacement in Engine Controls-4.3L.