GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the transmission oil pan and the oil filter. Refer to Automatic Transmission Fluid and Filter Replacement .

  3. Object Number: 102558  Size: SH
  4. Remove the valve bore plug retainer ring (1).

  5. Object Number: 43320  Size: SH
  6. Remove the following parts:
  7. • The valve bore plug
    • The TCC valve
    • The TCC valve spring

Installation Procedure


    Object Number: 43320  Size: SH
  1. Install the following parts:
  2. • The TCC valve spring.
    • The TCC valve.
    • The valve bore plug.

    Object Number: 102558  Size: SH
  3. Install the valve bore plug retainer ring (1).
  4. Install the transmission oil pan and oil filter. Refer to Automatic Transmission Fluid and Filter Replacement .
  5. Lower the vehicle.
  6. Important: It is recommended that transmission adaptive pressure (TAP) information be reset.

    Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to relearn TAP values. Transmission performance may be affected as new TAP values are learned.

  7. Reset the TAP values. Refer to Adapt Function .