Delphi-Harrison HU6 compressors are utilized only on pickup models. The replacement compressor assembly is shipped dry. This compressor is a 6 cylinder axial design with a displacement of 16.87 cu cm (10 cu in).

The Denso 10S17 compressor is utilized only on pickup model vehicles with front air (C60). The replacement compressor assembly is shipped wet. This compressor is a 10 cylinder axial design with a displacement of 188 cu cm (11.5 cu in).

The Denso 10S20 compressor is utilized only on utilty model vehicles with a front and rear air (C69). The replacement compressor assembly is shipped wet. The compressor is a 10 cylinder axial design with a displacement of 206 cu cm (12.6 cu in).

The service kit available for Denso compressors includes all removable pieces down to (but not including) the compressor shaft.