Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Verify the fault is present. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections | |
2 | Did you perform the Instrument Cluster Diagnostic System Check? | -- | ||
3 |
Does the scan tool indicate that the seat belt is buckled? | -- | ||
4 |
Does the seat belt parameter change state? | -- | ||
5 | Replace the LH seat belt buckle. Refer to Front Seat Belt Buckle Replacement . Did you complete the replacement? | -- | -- | |
6 | Test the signal circuit of the seat belt switch for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | ||
7 | Replace the body control module (BCM). Refer to Body Control Module Replacement in Body Control Systems. Did you complete the replacement? | -- | -- | |
8 | Replace the instrument panel cluster (IPC). Refer to Instrument Cluster Replacement in Instrument Panel, Gauges and Console. Did you complete the replacement? | -- | -- | |
9 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
