GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Chevy C Silverado - 2WD 🢒 Restraints 🢒 SIR 🢒 Front Seat Trim Panel Replacement

Removal Procedure

    Object Number: 378528 Size: SH
  1. Remove the screws retaining the seat back release handle and the seat recliner handle and remove the handles.
  2. Remove the remaining screws retaining the trim panel to the seat.
  3. Remove the trim panel from the seat.

Installation Procedure
  1. Position the trim panel on the seat.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 378528 Size: SH
  2. Install the screws retaining the trim panel to the seat.

    3. Tighten
    Tighten the trim panel screws to 2 N·m (18 lb in).

  3. Install the remaining screws retaining the seat back release handle and the seat recliner handle to the seat.

    4. Tighten
    Tighten the seat recliner handle screws to 2 N·m (18 lb in).