Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Exterior Lights Schematics | |||
1 | Did you perform the Lighting Diagnostic System Check? | ||
2 | Verify the fault is present. Does the system operate normally? | Go to Testing for Electrical Intermittents in Wiring Systems | |
3 |
Do the turn signals function properly? | ||
4 |
Is the fuse open? | ||
5 |
Does the test lamp illuminate? | ||
6 |
Does the test lamp illuminate? | ||
7 | Repair the open in the fused battery positive voltage circuit between the engine wiring harness junction block and C201A. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | |
8 | Repair the open in the turn/hazard flasher feed circuit between the turn/hazard switch and the turn/hazard flasher. Refer to Wiring Repairs in Wiring Systems. If no open is found, replace the turn/hazard flasher. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column. Did you complete the repair? | -- | |
9 | Repair the short to ground in the turn/hazard flasher feed circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | |
10 | Replace the turn/hazard switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column - Tilt. Did you complete the replacement? | -- | |
11 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | |
