Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the Wiper/Washer System Circuit Description and perform the necessary inspections? | -- | Go to Symptoms | |
2 |
Is the test light on? | -- | ||
3 | Repair the short to voltage in CKT 112. If no short circuit is found, replace the wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle . Is the repair or replacement complete? | -- | -- | |
4 | Connect a J 35616-200 from wiper motor connector terminal D to ground. Is the test light on? | -- | ||
5 | Repair the short to voltage in CKT 113. If no short circuit is found, replace the wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle . Is the repair or replacement complete? | -- | -- | |
6 | Connect a J 35616-200 from wiper motor connector terminal C to ground. Is the test light on? | -- | ||
7 | Repair the short to voltage in CKT 92. If no short is found, replace the wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle . Is the repair or replacement complete? | -- | -- | |
8 | Replace the windshield wiper motor. Refer to Windshield Wiper Motor Replacement . Is the replacement complete? | -- | -- | |
9 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Symptoms |
