Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
Schematic Reference: Radio/Audio System Schematics | ||||
1 | Did you review the Radio/Audio System Description and Operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Radio/Audio System Description and Radio/Audio System Operation |
2 |
Does the remote playback device operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 | Is the remote playback device a CD changer? | -- | Go to Step 5 | Go to Step 4 |
4 | Attempt to insert a tape/CD into the remote playback device. Does the remote playback device accept the tape/CD? | -- | Go to Step 8 | Go to Step 5 |
5 |
Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 6 |
6 | Test the remote CD/ cassette player supply voltage circuit for an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 7 |
7 | Test the ground circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs in Wirng Systems Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 8 |
8 | Test the E and C serial data circuit for a short, high resistance or an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 9 |
9 | Inspect for poor connections at the harness connector of the Remote Playback Device. Refer to Testing for Intermittent Conditions and Poor Connections in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 10 |
10 | Inspect for poor connections at the harness connector of the radio. Refer to Testing for Intermittent Conditions and Poor Connections in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 11 |
11 | Replace the remote playback device. Refer to Remote Compact Disc Player Replacement for service procedure. Did you complete the replacement? | -- | Go to Step 12 | -- |
12 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
