GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Chevy C Silverado - 2WD 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Air Distributor Duct Replacement

Removal Procedure
  1. Remove the IP carrier. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages and Console.

    2. Object Number: 363003 Size: SH
  2. Remove the air distribution duct retaining screws.
  3. Remove the air distribution duct.

Installation Procedure

    Object Number: 363003 Size: SH
  1. Install the air distribution duct.
  2. Install the air distribution duct retaining screws.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Tighten the screws.

    4. Tighten
    Tighten the screws to 1.6 N·m (14 lb in).

  4. Install the IP carrier. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages and Console.