GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Chevy C Silverado - 2WD 🢒 Body and Accessories 🢒 Exterior Trim 🢒 Rocker Panel Molding Replacement

Removal Procedure
  1. Open the front and rear side doors.
  2. Remove the rear door. Refer to Rear Door Replacement in Doors.

    3. Object Number: 869909 Size: SH
  3. Pry with a suitable tool at the rocker panel molding section (2) to release tape.
  4. Pry at sections (4) to release spring clips from the rocker panel molding.
  5. Remove the rocker panel molding (3) from the vehicle.

Installation Procedure

    Object Number: 869909 Size: SH
  1. Install the rocker panel molding (3) to the vehicle.
  2. Align the spring clips (4) to the vehicle.
  3. Press at sections (4) to secure the rocker panel molding to the vehicle.
  4. Remove the tape backing (2) and press firmly on the rocker panel molding.
  5. Install the rear door. Refer to Rear Door Replacement in Doors.