Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Diagnostic System Check? | -- | Go to Step 2 | |
2 | Verify the fault is present. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 |
Does the test lamp illuminate? | -- | Go to Step 4 | Go to Step 10 |
4 | Use a Digital Multi Meter (DMM) to test the ground circuit of the left power window switch for continuity. Is there continuity? | -- | Go to Step 5 | Go to Step 9 |
5 |
Does the test lamp illuminate? | -- | Go to Step 6 | Go to Step 7 |
6 | Test the power window motor feed-LF up and power window motor feed-LF down circuits for an open or short to ground. Did you find and correct the condition? | -- | Go to Step 11 | Go to Step 8 |
7 | Replace the left power window/door lock switch. Refer to Front Side Door Window Switch Replacement . Is the repair complete? | -- | Go to Step 11 | -- |
8 | Replace the left power window motor. Refer to Front Side Door Window Module Replacement . Is the repair complete? | -- | Go to Step 11 | -- |
9 | Locate and repair a loose connection or an open in the left power window switch ground circuit. Refer to Circuit Testing and Wiring Repairs Is the repair complete? | -- | Go to Step 11 | -- |
10 | Locate and repair a loose connection or an open in the fused RAP relay output circuit. Refer to Circuit Testing and Wiring Repairs . Is the repair complete? | -- | Go to Step 11 | -- |
11 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
