Did you perform the power door system diagnostic system check?

--

Go to Step 2

Go to Diagnostic System Check - Power Door Systems

Operate the window from both the master (LF) and the RR power window switch.

Does the window operate from both the master (LF) window switch and the RR switch?

--

Go to Testing for Intermittent Conditions and Poor Connections

Go to Step 3

Does the window operate from the master window switch?

--

Go to Step 4

Go to Step 5

Test the ground circuit of the RR window switch for an open.

Did you find and correct the condition?

--

Go to Step 17

Go to Step 13

Does the window operate from the RR power window switch?

--

Go to Step 11

Go to Step 6

Connect a test lamp between the RAP2 relay output circuit and ground at the RR switch.

Does the test lamp illuminate

--

Go to Step 8

Go to Step 7

Test the RAP2 relay output circuit for an open or short to ground.

Did you find and correct the condition?

--

Go to Step 17

Go to Retained Accessory Power (RAP) Inoperative

1. Connect a test lamp between the RR window up and window down feed circuits at the motor.
2. Press the window switch to the up or down position.

Does the test lamp illuminate?

--

Go to Step 10

Go to Step 9

Test the RR power window motor feed circuits for an open.

Did you find and correct the condition?

--

Go to Step 17

Go to Step 13

Replace the power window motor.

Did you complete the replacement?

--

Go to Step 17

--

1. Connect a test lamp between the master window switch RR window down circuit and battery voltage at the RR window switch.
2. Press the RR switch to the down position on the master switch.

Does the test lamp illuminate?

--

Go to Step 12

Go to Step 14

1. Connect a test lamp between the master window switch RR window up circuit and battery voltage at the RR window switch.
2. Press the RR switch to the up position on the master switch.

Does the test lamp illuminate?

--

Go to Step 13

Go to Step 15

Replace the power RR window switch.

Did you complete the replacement?

--

Go to Step 17

--

Test the RR window down circuit from the master switch for an open.

Did you find and correct the condition?

--

Go to Step 17

Go to Step 16

Test the RR window up circuit from the master switch for an open.

Did you find and correct the condition?

--

Go to Step 17

Go to Step 16

Replace the master window switch.

Did you complete the replacement?

--

Go to Step 17

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 2