Luggage Carrier Replacement All Except Z-71

1. Remove the rear pad covers.
2. Remove the cross rails by releasing the lever on both sides and sliding toward rear of vehicle.
3. Remove the side rail attaching bolts.
4. Remove the side rail(s).

1. Install the side rail(s).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the side rail attaching bolts.

Tighten
Tighten the bolts 4 N·m (35 lb in).

3. Install the cross rails by sliding toward front of vehicle and engaging lever on both sides.
4. Install the rear pad covers by snapping into place.