Assist Handle Replacement Pickup

1. Remove the assist handle screw covers.
2. Remove the screws.
3. Remove the assist handle from the vehicle.

1. Install the assist handle to vehicle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the assist handle screws.

Tighten
Tighten the screws to 2 N·m (18 lb in).

3. Install the assist handle screw covers.

Assist Handle Replacement Extended Cab Pickup

1. Remove the handle screw covers.
2. Remove the screws.
3. Remove the handle.

1. Install the handle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the screws.

Tighten
Tighten the screws to 2 N·m (18 lb in).

3. Install the handle screw covers.

Assist Handle Replacement Utility Rear

1. Remove center pillar trim panel. Refer to Center Pillar Garnish Molding Replacement .
2. Remove the assist handle retraining screws.
3. Remove the assist handle from the vehicle.

1. Install the assist handle to the vehicle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the assist handle screws.

Tighten
Tighten the assist handle screws to 6 N·m (53 lb in).

3. Install the center pillar trim panel. Refer to Center Pillar Garnish Molding Replacement .