Digital Radio Antenna Cable Replacement Primary

1. Remove the left windshield pillar garnish molding. Refer to Windshield Pillar Garnish Molding Replacement in Interior Trim.
2. Disconnect the XM radio antenna cable (1).

Notice: Use care when removing and installing the headliner. If reusing the headliner lay the headliner down flat on a clean surface. Excessive bending will damage the headliner.




3. Lower the front of the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.
4. Disconnect the XM antenna cable from the antenna connection above the headliner.
5. Remove the upper I/P trim panel. Refer to Instrument Panel Upper Trim Panel Replacement in Instrument Panel, Gages and Console.
6. Remove the cable clips from the windshield pillar and remove the antenna cable from the vehicle.

1. Install the XM antenna cable and clips to the windshield pillar.
2. Connect the cable to the antenna connection above the headliner.
3. Install the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.



4. Connect the XM radio antenna cable (1) at the IP.
5. Install the upper I/P trim panel. Refer to Instrument Panel Upper Trim Panel Replacement in Instrument Panel, Gages and Console.
6. Install the windshield pillar garnish molding. Refer to Windshield Pillar Garnish Molding Replacement in Interior Trim.