Step | Action | Yes | No | ||
---|---|---|---|---|---|
Schematic Reference: Suspension Controls Schematics Connector End View Reference: Suspension Controls Connector End Views | |||||
1 | Did you review the system and circuit description and perform the necessary inspections? | Go to Step 2 | |||
2 | Verify the fault is present. Does the system operate normally? | Go to Testing for Electrical Intermittents in Wiring Systems | Go to Step 3 | ||
3 |
Does the test lamp illuminate? | Go to Step 4 | Go to Step 8 | ||
4 | Connect a test lamp between the selectable ride switch control circuit and a good ground. Refer to Circuit Testing in Wiring Systems. Does the test lamp illuminate? | Go to Step 10 | Go to Step 5 | ||
5 |
Does the test lamp illuminate in the ON position and off in the OFF position? | Go to Step 6 | Go to Step 13 | ||
6 |
Does the test lamp illuminate? | Go to Step 7 | Go to Step 11 | ||
7 |
Did you find the condition? | Go to Step 12 | |||
8 | Test the ignition 1 voltage circuit for an open or a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 14 | Go to Step 9 | ||
9 | Repair the short to ground in the selectable ride switch control circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 14 | -- | ||
10 | Repair the short to voltage in the selectable ride switch control circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 14 | -- | ||
11 | Repair the open in the selectable ride switch control circuit between the switch and the Underhood Junction Block. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 14 | -- | ||
12 | Repair the conditions as necessary. Refer to the appropriate procedure in Wiring Systems from the following list:
Did you complete the repair? | Go to Step 14 | -- | ||
13 | Replace the selectable ride switch. Refer to Electronic Suspension Switch Replacement . Did you complete the replacement? | Go to Step 14 | -- | ||
14 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |