Tools Required

J 42738 Seal Installer

1. Remove the transfer case. Refer to Transfer Case Adapter Replacement .
2. Using a flat-tipped screwdriver, remove the input shaft seal.

Important: When installing the input shaft seal, make sure that the part numbers on the seal are facing outward (away from the body of the transfer case).

1. Align the input seal evenly on the input shaft.

Important: The input shaft seal should be even with the surface of the transfer case after installation.

2. Using the J 42738 , install the input shaft seal.
3. Install the transfer case. Refer to Transfer Case Adapter Replacement .
4. Check the fluid level, add fluid if necessary.