Service VME - Rear Seat Does Not Fold Down into the Stowed Position - GMT800 inoperative back information cable lever frame black connector latch
| Subject: | Service VME - Rear Seat Does Not Fold Down into the Stowed Position |
| Models: | . |
When servicing the vehicle with the VIN you entered, the following diagnosis might be helpful if the vehicle exhibits the described symptoms.
SERVICE VME
Some customers may comment that the rear seat back in their 1500 Series Crew Cab does not fold down into the stowed position. Root cause may be the rear seat black plastic connector has become disconnected. Dealers may be able to correct this situation by reattaching the black plastic connector to the activation lever on the underside of the 60 percent rear seat frame (near the seat belt sleeve).
.
Please follow this diagnosis process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed. If these steps do not resolve the condition, please contact GM TAC for further diagnostic assistance. This diagnostic approach was developed for the vehicle with the VIN you entered and should not be automatically be used for other vehicles with similar symptoms.
Models:
(04 Chevrolet Silverado 1500 Series Crew Cab ) and (04 GMC Sierra 1500 Series Crew Cab)
.
