For 1990-2009 cars only
Removal Procedure
- Release the park brake.
- Remove the park brake pedal. Refer to Parking Brake Lever Pedal Assembly Replacement .
- Roll the carpet back to access cable grommet.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Disengage the grommet and the cable from the floor pan.
- Disconnect the front cable from the intermediate cable.
- Remove the cable from the body mount by depressing the retaining tabs.
- Remove the cable.
Installation Procedure
- Install the cable.
- Snap the retainer tabs into the body mount.
- Connect the front cable to the intermediate cable.
- Route the cable in through the floor pan and engage the grommet.
- Remove the safety stands.
- Lower the vehicle.
- Roll the carpet into place.
- Install the park brake pedal. Refer to Parking Brake Lever Pedal Assembly Replacement .
- Adjust the park brake system. Refer to Park Brake Adjustment .
