Intake Air Temperature (IAT) Sensor 2 Replacement for Chevrolet Chevy C Silverado - 2WD 2006

1. Remove the air intake pipe. Refer to Air Intake Pipe Replacement .
2. Disconnect the intake air temperature (IAT) sensor electrical connector (1).
3. Remove the IAT sensor from the center intake manifold.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the IAT sensor to the center intake manifold.

Tighten
Tighten the IAT sensor to 25 N·m (18 lb ft).

2. Connect the IAT sensor electrical connector (1).
3. Install the air intake pipe. Refer to Air Intake Pipe Replacement .