Air Cleaner Assembly

1. Loosen the duct clamp.
2. Remove the air cleaner assembly bolts.
3. Remove the air cleaner assembly.

1. Install air cleaner assembly
2. Install the air cleaner assembly bolts.

Tighten
Tighten the bolt to 18 N·m (13 lb ft).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

Air Cleaner Air Intake Duct

1. Remove the engine cover.
2. Remove the air intake retaining nut.
3. Remove the air intake duct from fuel meter assembly.



4. Loosen the air intake duct from the air cleaner assembly.
5. Remove the air intake duct.

1. Install the air intake duct to air cleaner assembly.



2. Install the air intake duct on the fuel metering assembly and tighten retaining nut.

Tighten
Tighten the nut 2 N·m (18 lb in).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.