Removal Procedure
- Remove the two nuts securing the two cooler lines to the oil cooler.
- Remove the four bolts securing the auxiliary oil cooler brackets to the radiator support.
- Remove the four bolts and the nuts securing the oil cooler to the two brackets.
Installation Procedure
- Install the four bolts and the nuts securing the oil cooler to the two brackets.
- Install the four bolts securing the oil cooler brackets to the radiator support.
- Install the two nuts securing the two oil cooler lines to the oil cooler.
Tighten
Tighten the bolts to 10 N·m (89 lb in).
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the bolts to 10 N·m (89 lb in).
Tighten
Tighten the nuts securing the cooler lines to the oil cooler to 23 N·m
(17 lb ft).
